Fabrications – Heliocentricities (part six)

The fourth and last leaf design in this series uses a technique that produces a luminous web-like surface. I saw a similar technique in Quilting Arts Newsletter several months ago. My method is a little different, but it works well for me.

To create the leaves, first cut some synthetic organza a little larger than the size of your leaf templates. I used an organza print.

Cut Organza

Next, cut pieces of Stitch Witchery the same size as your cut organza. Place the organza on a pressing sheet. Top the pieces with the Stitch Witchery. Cover these layers with parchment paper. With an iron set on the “silk” setting, press the pieces for about 2 seconds. Very important! Do not over press or the Stitch Witchery will melt. The goal is to have the Stitch Witchery somewhat attached to the base organza but not melted into it.

Lightly Fused Stitch Witchery

Cover your work area with plastic or glass. Gather the following supplies: a stiff bristle paintbrush, a respirator, and several colors of Pearl Ex Powdered Pigments. Pearl Ex pigments are nontoxic, but when I use powders I always use a respirator.

Pearl Ex Powdered Pigments

Dip your paintbrush into one of the powdered pigments and brush it around on the surface of the Stitch Witchery. There’s no right or wrong way to do this. Add as many colors as you like, or use a single color if you prefer.

When you’re finished, transfer the pieces to a pressing sheet, and set your iron on a cotton setting with steam activated. You are NOT going to press the pieces. Pick your iron up and hover it over the organza pieces about 1-2 inches above the ironing surface. Do not let the iron touch your work. Move slowly above the pieces, allowing the steam to adhere the fusible to the base organza and set the powdered pigments. About 5-6 seconds should do the trick. Let the surface cool before touching your pieces.

Set Pigments

Transfer the pigmented organza to a glass or heat proof flat surface. Place your leaf templates on top of the pieces. (I used template plastic, which can be melted by the heat tool, but moved quickly so that the hot tip would not damage the edges.)

Leaf Templates

With a hot heat tool (stencil cutter or wood burning tool), move quickly around the edges of your template. The organza should melt away easily. Save your scraps for a future project.

Heat Tool Finished Edges

Transparency and luminosity give each leaf a truly unique appearance. Of course, leaves aren’t the only things you can create with this technique.


N. Rene West
Time Treasured